Entry Post

Toyota Hilux T-belt Reset Instruction All Model

Post Content

Toyota Hilux T-belt Reset Instruction All Model

Toyota Hilux T-belt Reset Instruction All Model

The Toyota Hilux is a series of light commercial vehicles produced and marketed by the Japanese manufacturer Toyota. The majority of these vehicles were sold as pickup truck or cab chassis variants although they could be configured in a variety of body styles. Most countries used the Hilux name for the entire life of the series but in North America, the Hilux name was retired in 1976 in favor of Truck, Pickup Truck, or Compact Truck. In North America the popular option package, the SR5 (Sport Rally 5-Speed), was colloquially used as a model name for the truck, even though the option package was also used on other Toyota models like the 1972 to 1979 Corolla. In 1984, the Toyota Trekker, the camper version of the Hilux, was renamed as the 4Runner in Australia and North America, and as the Hilux Surf in Japan. In 1995, Toyota introduced a new pickup model, the Tacoma in North America, discontinuing the Hilux/Pickup there. The 4Runner is now a full SUV, and the more recent models do not resemble the Tacoma.

Please Follow the instruction below:

Reset timing belt replacement warning lamp as follows: 

  1. Switch ignition ON.
  2. Ensure ODO/TRIP display set to ODO information. 
  3. Switch ignition OFF.
  4. Press and hold ODO/TRIP display switch. 
  5. Switch ignition ON. 
  6. Wait 5 seconds. 
  7. Release switch.
  8. Within 5 seconds press and release switch. 
  9. The setting value is displayed.
  10. Press and hold ODO/TRIP display switch. Wait more than 5 seconds. 
  11. Release switch.
  12. Ensure ODO information displayed and warning lamp goes out.


1. Change the view on the speedometer in the ODO mode display (ON position contact lock).
2. Turn the ignition OFF.
3. Press and hold the meter button, and turn the ignition ON
4. Press and hold the meter button for more than 5 seconds
5. Release the button and then press again for 5 seconds
6. Release the button
7. Press and release to select the interval (press 15 times) before the following warning light is on.
The interval before the next flame warning light can be calculated using the number of times the button is pressed multiplying by 10000. The current example of vehicle mileage is 150000 km. If the button is pressed 15 times then the warning light will come back on when 300000 km distance [150000 + (15 X 10000)]. The maximum replacement standard of the Innova Diesel timing belt is 150000 km.
8. After selecting the interval, hold the button for 5 seconds or more
9. Meter view returns to ODO mode and warning light off

If step (7) can not be performed for 30 seconds or more after step (6), the interval does not change and the display will return to ODO mode automatically

There are no comments.

Compose Comment