Tag Relearn

Toyota Yaris Vios Echo Engine Control Module Programming and Relearning Procedure

Post Content

Toyota Yaris Engine Control Module Programming and Relearning Procedure

Toyota Yaris Vios Echo Engine Control Module Programming and Relearning Procedure

This are the things you need to do when replacing the new ECU to your Toyota yaris.

 

1NZ-FE ENGINE CONTROL SYSTEM: SFI SYSTEM: REGISTRATION

1.DESCRIPTION

2.READ VIN

3.WRITE VIN

NOTICE: The Vehicle Identification Number (VIN) must be input into the replacement ECM.

HINT The VIN is a 17-digit alphanumeric number. A OBD Diagnostic tools is required to register the VIN.

HINT This registration section consists of two parts, Read VIN and Write VIN.

(a)Read VIN: This process allows the VIN stored in the ECM to be read in order to confirm that the two VINs, provided with the vehicle and stored in the vehicle’s ECM, are the same.

(b)Write VIN: Explains the VIN writing process in a flowchart. This process allows the VIN to be input into the ECM. If the ECM is changed, or the ECM VIN and vehicle VIN do not match, the VIN can be registered, or overwritten in the ECM by following this procedure.

READ VIN PROCEDURE

(a)Confirm the vehicle VIN.

(b)Connect the OBD Diagnostic tools to the OBD Socket.

(c)Turn the ignition switch to ON.

(d)Turn the OBD Diagnostic tools on.

(e)Enter the following menus: Powertrain / Engine and ECT / Utility / VIN / VIN Read.

 

WRITE VIN PROCEDURE

(a)Confirm the vehicle VIN.

(b)Connect the OBD Diagnostic tools to the DLC3.

(c)Turn the ignition switch to ON.

(d)Turn the OBD Diagnostic tools on.

(e)Enter the following menus: Powertrain / Engine and ECT / Utility / VIN / VIN Write.

 

NOTE:

When replacing the new ECU all you need is to register the  VIN to you new ECU.

If you are using LAUNCH X431 PRO Powertrain / Engine and ECT / Utility or Special Function/ VIN / VIN Write.

Honda Odyssey 2005-2015 TPMS Reset

Honda Odyssey 2007-2015 TPMS Reset

Post Content

Honda Odyssey and Honda Shuttle  TPMS reset and relearn procedure

The Honda Odyssey is a minivan manufactured by Japanese automaker Honda since 1994, marketed worldwide, and now in its fourth & fifth generation in North America and Japan, respectively.

The Odyssey had originally been conceived and engineered in Japan, in the wake of country’s economic crisis of the 1990s – which in turn imposed severe constraints on the vehicle’s size and overall concept, dictating the minivan’s manufacture in an existing facility with minimal modification. The result was a smaller minivan, in the Compact MPV class, that was well received in the Japanese domestic market and less well received in North America. The first generation Odyssey was marketed in Europe as the Honda Shuttle.

Subsequent generations diverged to reflect market variations, and Honda built a plant in Lincoln, Alabama, incorporating the ability to manufacture larger models. Since model year 1999, Honda has marketed a larger (large MPV-class) Odyssey in North America and a smaller Odyssey in Japan and other markets. Honda also offered the larger North American Odyssey in Japan as Honda LaGreat between 1999 and 2004.

Please follow the Tpms Reset Instruction below!

Honda Odyssey 2005-2015 Tpms Reset – Tire Pressure Monitoring System Reset
1. A properly formatted scan tool is required to learn new sensor IDs when replacing sensors.
2. After sensor IDs are registered to vehicle, the MIL will flash until the vehicle is driven and the sensors IDs are received by the vehicle.
3. This process could take 1-1 O miles of continuous driving.

 

Thank you! 🙂