Tag ford

Ford E-150 engine sensors and component

Post Content

Ford E-150 engine sensors and component

V8 4.6L

The Ford E-Series (also known as the Ford Econoline and Ford Club Wagon throughout various stages of its production) is a range of full-size vans produced by the American automaker Ford since 1960. Introduced for the 1961 model year as the replacement for the Ford F-Series panel van, four generations of the model line have been produced. In addition to cargo van and passenger van body styles, the Ford E-Series has been produced as a cutaway van chassis and stripped chassis (a chassis without bodywork).

With a 56-year production run, the Ford E-Series is the second longest-produced nameplate by Ford worldwide; only the Ford F-Series (1948–present) has been produced longer. For the 2015 model year, the Ford E-Series cargo/passenger vans were replaced in North America by the Ford Transit introduced worldwide in 2013. As of the 2017 model year, only cutaway and stripped chassis configurations of the E-Series are produced.

Since 2006, the E-Series has been assembled at the Ford Motor Company Ohio Assembly plant in Avon Lake, Ohio. From 1961 to 2005, the Ford E-Series was assembled at Lorain Assembly in Lorain, Ohio.

Prior to its discontinuation, the Ford E-Series cargo/passenger van was the best-selling full-size van in the United States since 1980; in 2007, the model held a 79.6% share of the full-size van segment. Commercial or fleet users represented 95% of sales, with cargo vans accounting for nearly half of production.

FORD e-150 sensors locations (1)


Ford E-150 engine sensors and component

V8 5.4

V8 5.4L ENGINE_3 sensors location engine (1)

Ford Five Hundred TPMS Reset and Relearn Tutorial

2005 ford five hundred tpms

Post Content

Ford Five Hundred TPMS Reset and Relearn Tutorial

WITH STANDARD IGNITION:
1. Inflate all tires to pressure listed on tire placard.
2. Turn ignition to OFF position and press and release brake pedal.
3. Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
4. Press and release brake pedal.
5. Turn ignition to OFF position.
6. Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
7. Horn will sound once and TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE. Place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized. Repeat step for RF, RR, and LR tires.
8. After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, the training procedure must be repeated.

**WITH INTEGRATED KEY FOB (ACTUAL KEY CONTAINED IN KEY FOB) PUSH-BUTTON START:
1. With vehicle off, press and release the brake pedal.
2. Using the push button, press and hold the button until the vehicle is in accessory mode (ACC mode). WARNING: DO NOT PUSH AND RELEASE TOO QUICKLY…PUSH–WAIT FOR SOUND–RELEASE.
3. Power off by pushing the button 1 time.
4. Repeat 2 more times, ending in ACC mode.
5. Press and release the brake pedal, then turn vehicle off.
6. Using the push button, press and hold the button until the vehicle is in accessory mode.
7. Power off by pushing the button 1 time.
8. Repeat 2 more times, ending in ACC mode.
9. Horn will sound once the TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE.
10. Starting at LF tire, decrease air pressure until horn chirps. Repeat procedure for remaining tires in the following order: RF, RR, and LR. If equipped with banded sensors, place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized. Repeat step for RF, RR, and LR tires.
11. After successfully programming the LR tire, the message center should display “TRAINING COMPLETE.”
12. Inflate all tires to pressure listed on tire placard.

***WITH INTELLIGENT ASSIST IGNITION SYSTEM (NO ACTUAL KEY CONTAINED IN KEY FOB):
1. With vehicle off, press and release the brake pedal.
2. Using the push button, press once to turn on, then press again to put vehicle into ACC mode, then press again to turn vehicle off.
3. Repeat 2 more times, ending in ACC mode.
4. Press and release the brake pedal, then turn vehicle off.
5. Using the push button, press once to turn on, then press again to put vehicle into ACC mode, then press again to turn vehicle off.
6. Repeat 2 more times, ending in ACC mode.
7. Horn will sound once and TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE.
8. Starting at LF tire, decrease air pressure until horn chirps. Repeat procedure for remaining tires in the following order: RF, RR, and LR. If equipped with banded sensors, place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized. Repeat step for RF, RR, and LR tires.
9. After successfully programming the LR tire, the message center should display “TRAINING COMPLETE.”
10. Inflate all tires to pressure listed on tire placard.