Ford E-Series TPMS Reset Guide

Ford E-Series TPMS Reset Guide

 

*Ford TPMS Relearn Tool (or properly formatted TPMS lean tool) is required to relearn following rotation, tire replacement, and sensor replacement. This tool is located in the glove box with the owner’s manual.
1. Inflate all tires to pressure listed on tire placard.
2. Turn ignition to OFF position and press and release brake pedal.
3. Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
4. Press and release brake pedal.
5. Turn ignition to OFF position.
6. Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
7. Horn will sound once and TPMS will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE. Place antennae of learn tool on sidewall of LF tire 180° from valve stem to activate sensor. Horn will sound once sensor has been recognized. Repeat step for RF, RR, and LR tires.
8. After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, the training procedure must be repeated.

 

Related Topics  Ford F150 HD TPMS Reset and Relearn Instructions

Ford E-Series TPMS Reset Guide

Leave a Reply

Your email address will not be published. Required fields are marked *