Category Sw4

Toyota Fortune Hilux Sw4 T-belt Warning Light Reset Instruction

Post Content

Toyota Fortune Hilux Sw4 T-belt Warning Light Reset Instruction

Toyota Fortune Hilux Sw4 T-belt Warning Light Reset Instruction

Toyota Fortune Hilux Sw4 T-belt Warning Light Reset Instruction

The Toyota Fortuner  also known as the Toyota SW4, is a mid-size SUV manufactured by Toyota. Originally assembled only in Thailand but later also in Indonesia and other countries, the Fortuner is built on the Toyota Hilux pickup truck platform. It features three rows of seats and is available in rear-wheel drive or four-wheel drive. The Fortuner is part of Toyota’s IMV project in Thailand, which also includes the Toyota Hilux and the Kijang Innova (in Indonesia). Developed in large part by Toyota’s Thai operations, the Fortuner has piggybacked the success of the Hilux and is now built in a number of countries including Egypt, India, Indonesia, Argentina and Pakistan.

While the first generation Fortuner was developed in Thailand by Thai and Japanese engineers, the facelift version of the Fortuner, as well as the Hilux and the Innova, was designed in Australia by Toyota Australia, which is also responsible for developing the next generation of the Fortuner.

The Fortuner is not offered in Japan, Europe, North America, China or South Korea. For the medium pick-up based SUV segment in those markets, Toyota offers the Hilux Surf (Japan), 4Runner (North America) and Land Cruiser Prado (Europe, Australasia and China). However, in some Central and South American countries and New Zealand, Toyota offers the Fortuner alongside the 4Runner and Land Cruiser Prado, like in Panama or Colombia.

The name “Fortuner” comes from the English word, Fortune.

Please Follow the instruction below:

Reset timing belt replacement warning lamp as follows: 

  1. Switch ignition ON.
  2. Ensure ODO/TRIP display set to ODO information. 
  3. Switch ignition OFF.
  4. Press and hold ODO/TRIP display switch. 
  5. Switch ignition ON. 
  6. Wait 5 seconds. 
  7. Release switch.
  8. Within 5 seconds press and release switch. 
  9. The setting value is displayed.
  10. Press and hold ODO/TRIP display switch. Wait more than 5 seconds. 
  11. Release switch.
  12. Ensure ODO information displayed and warning lamp goes out.


1. Change the view on the speedometer in the ODO mode display (ON position contact lock).
2. Turn the ignition OFF.
3. Press and hold the meter button, and turn the ignition ON
4. Press and hold the meter button for more than 5 seconds
5. Release the button and then press again for 5 seconds
6. Release the button
7. Press and release to select the interval (press 15 times) before the following warning light is on.
The interval before the next flame warning light can be calculated using the number of times the button is pressed multiplying by 10000. The current example of vehicle mileage is 150000 km. If the button is pressed 15 times then the warning light will come back on when 300000 km distance [150000 + (15 X 10000)]. The maximum replacement standard of the Innova Diesel timing belt is 150000 km.
8. After selecting the interval, hold the button for 5 seconds or more
9. Meter view returns to ODO mode and warning light off

If step (7) can not be performed for 30 seconds or more after step (6), the interval does not change and the display will return to ODO mode automatically