Category Oil Reset

How do you reset the oil light on a Buick Car?

How do you reset the oil light on a Buick Century,How do you reset the oil light on a Buick LaCrosse,How do you reset the oil light on a Buick LeSabre,How do you reset the oil light on a Buick Park Avenue,How do you reset the oil light on a Buick Rainier,How do you reset the oil light on a Buick Regal,How do you reset the oil light on a Buick Rendezvous,How do you reset the oil light on a Buick Riviera,How do you reset the oil light on a Buick Roadmaster,How do you reset the oil light on a Buick Terraza

Post Content

Answered the Question on How do you reset the oil light on a Buick Car?

Buick Century 1997-2006 With DIC:  Turn ignition to the “ON” position.  Press “MODE” button repeatedly until oil life is displayed.  Press and hold “RESET” for 5 seconds. Without DIC:  Turn ignition to the “ON” position.  Slowly depress accelerator pedal 3 times within 5 seconds.  “CHANGE OIL SOON” lamp will flash.  Turn ignition off.  Start engine.  Oil life will display 100%.

Buick Century 1997-2006 With DIC:  Turn ignition to the “ON” position.  Press “MODE” button repeatedly until oil life is displayed.  Press and hold “RESET” for 5 seconds. Without DIC:  Turn ignition to the “ON” position.  Slowly depress accelerator pedal 3 times within 5 seconds.  “CHANGE OIL SOON” lamp will flash.  Turn ignition off.  Start engine.  Oil life will display 100%.

Buick LaCrosse 2005-2006 With DIC:  Turn ignition to the “ON” position.  Press “i” button repeatedly until “ENGINE OIL MONITOR” is displayed.  Press button with the arrow pointing left until “CHANGE OIL SOON” message has been reset.  Turn ignition off. Without DIC:  Turn ignition to the “ON” position.  Slowly depress accelerator pedal 3 times within 5 seconds.  Turn ignition off.

Buick LeSabre 1994-2006 With DIC:  Turn ignition to the “ON” position.  Press “MODE” button repeatedly until oil life is displayed.  Press and hold “RESET” for 5 seconds.Without DIC:  Turn ignition to the “ON” position.  Slowly depress accelerator pedal 3 times within 5 seconds.  “CHANGE OIL SOON” lamp will flash.  Turn ignition off.  Start engine.  Oil life will display 100%.

Buick Park Avenue 1994-2006 With DIC:  Turn ignition to the “ON” position.  Press “MODE” button repeatedly until oil life is displayed.  Press and hold “RESET” for 5 seconds.Without DIC:  Turn ignition to the “ON” position.  Slowly depress accelerator pedal 3 times within 5 seconds.  “CHANGE OIL SOON” lamp will flash.  Turn ignition off.  Start engine.  Oil life will display 100%.

Buick Rainier 2003-2006 With DIC:  Turn ignition to the “ON” position.  Press “FUEL INFORMATION” button repeatedly until “ENGINE OIL LIFE” is displayed.  Press and hold button with the arrow pointing left until “OIL LIFE RESET” is displayed.Without DIC:  Turn ignition to the “ON” position.  Slowly depress accelerator pedal 3 times within 5 seconds.  “CHANGE OIL SOON” lamp will flash.  Turn ignition off.  Start engine.  Oil life will display 100%.

Regal 1997-2005 With DIC:  Turn ignition to the “ON” position.  Press “MODE” button repeatedly until oil life is displayed.  Press and hold “RESET” for 5 seconds.Without DIC:  Turn ignition to the “ON” position.  Slowly depress accelerator pedal 3 times within 5 seconds.  “CHANGE OIL SOON” lamp will flash.  Turn ignition off.  Start engine.  Oil life will display 100%.

Buick Rendezvous 2002-2006 With DIC:  Turn ignition to the “ON” position.  Press “MODE” button repeatedly until oil life is displayed.  Press and hold “RESET” for 5 seconds.Without DIC:  Turn ignition to the “ON” position.  Slowly depress accelerator pedal 3 times within 5 seconds.  “CHANGE OIL SOON” lamp will flash.  Turn ignition off.  Start engine.  Oil life will display 100%.

Buick Riviera 1998-1999 With DIC:  Turn ignition to the “ON” position.  Press “MODE” button repeatedly until oil life is displayed.  Press and hold “RESET” for 5 seconds.Without DIC:  Turn ignition to the “ON” position.  Slowly depress accelerator pedal 3 times within 5 seconds.  “CHANGE OIL SOON” lamp will flash.  Turn ignition off.  Start engine.  Oil life will display 100%.

Buick Roadmaster 1994-1996 Turn ignition to the “ON” position.  Slowly depress accelerator pedal 3 times within 5 seconds.  “CHANGE OIL SOON” lamp will flash.  Turn ignition off.  Start engine.  Oil life will display 100%.

Buick Terraza 2005-2006 Turn ignition to the “ON” position.  Press button with the arrow pointing left until “OIL” is displayed.  Press and hold button until oil life displays “100%”.  Turn ignition off.

 

How do you reset the oil light on a Buick Century
How do you reset the oil light on a Buick LaCrosse
How do you reset the oil light on a Buick LeSabre
How do you reset the oil light on a Buick Park Avenue
How do you reset the oil light on a Buick Rainier
How do you reset the oil light on a Buick Regal
How do you reset the oil light on a Buick Rendezvous
How do you reset the oil light on a Buick Riviera
How do you reset the oil light on a Buick Roadmaster
How do you reset the oil light on a Buick Terraza

How do you reset BMW Oil Service light?

How to reset bmw 3 Series (E36) 1994-2001 Oil Service warning light,How to reset bmw 3 Series (E46) 1998-2000 Oil Service warning light,How to reset bmw 3 Series (E46) 2000-2006 Oil Service warning light,How to reset bmw 3 Series Hatchback 1994-2001 Oil Service warning light,How to reset bmw 5 Series (E34) 1994-1996 Oil Service warning light,How to reset bmw 5 Series (E39) 1996-2000 Oil Service warning light,How to reset bmw 5 Series (E39) 2000-2003 Oil Service warning light,How to reset bmw 5 Series (E60) 2004-2006 Oil Service warning light,How to reset bmw 6 Series 2004-2006 Oil Service warning light,How to reset bmw 7 Series (E38) 1994-2002 Oil Service warning light,How to reset bmw 7 Series (E65/E66) 2002-2006 Oil Service warning light,How to reset bmw X3 2004-2006 Oil Service warning light,How to reset bmw X5 1999-2000 Oil Service warning light,How to reset bmw X5 2000-2006 Oil Service warning light,How to reset bmw Z3 1996-2002 Oil Service warning light,How to reset bmw Z4 2003-2006 Oil Service warning light,How to reset bmw Z8 2000-2003 Oil Service warning light

Post Content

Quick and best answer on How do you reset BMW Oil Service light?

Bmw 3 Series (E36) 1994-2001 Requires LED test light.  Turn ignition to the “ON” position.  Connect test light between terminal 7 of the diagnostic connector and ground.  After being connected for three seconds, five green LEDs will light up.  Turn ignition off.

Bmw 3 Series (E36) 1994-2001 Requires LED test light.  Turn ignition to the “ON” position.  Connect test light between terminal 7 of the diagnostic connector and ground.  After being connected for three seconds, five green LEDs will light up.  Turn ignition off.

Bmw 3 Series (E46) 1998-2000 Requires LED test light.  Turn ignition to the “ON” position.  Connect test light between terminal 7 of the diagnostic connector and ground.  After being connected for three seconds, five green LEDs will light up.  Turn ignition off.

Bmw 3 Series (E46) 2000-2006 Turn ignition off.  Press and hold button to left of speedometer.  Turn ignition to the “I” position.  After 5 seconds, “OIL SERVICE” or “INSPECTION” will display.  Release button.  Press and hold button again.  After 5 seconds, “RESET” will flash.  Release button.  Press button once more.  New interval is displayed.  Press and hold button again.  After 5 seconds, again.  After 5 seconds, “RESET” will flash.  Release button.  Press button again.  New interval is displayed.  Press button a final time.  “END SIA” is the time-based interval is displayed.  Release button.  Press and hold button displayed.  Turn ignition off.

Bmw 3 Series Hatchback 1994-2001 Requires LED test light.  Turn ignition to the “ON” position.  Connect test light between terminal 7 of the diagnostic connector and ground.  After being connected for three seconds, five green LEDs will light up.  Turn ignition off.

Bmw 5 Series (E34) 1994-1996 Requires LED test light.  Turn ignition to the “ON” position.  Connect test light between terminal 7 of the diagnostic connector and ground.  After being connected for three seconds, five green LEDs will light up.  Turn ignition off.

Bmw 5 Series (E39) 1996-2000 Requires LED test light.  Turn ignition to the “ON” position.  Connect test light between terminal 7 of the diagnostic connector and ground.  After being connected for three seconds, five green LEDs will light up.  Turn ignition off.

Bmw 5 Series (E39) 2000-2003 “Turn ignition off.  Press and hold button to left of speedometer.  Turn ignition to the “”I”” position.  After 5 seconds, “”OIL SERVICE”” or “”INSPECTION”” will display.  Release button.  Press and hold button again.  After 5 seconds, “”RESET”” will flash.  Release button.  Press button once more.  New interval is displayed.  Press and hold button again.  After 5 seconds, the time-based interval is displayed.  Release button.  Press and hold button  again.  After 5 seconds, “”RESET”” will flash.  Release button.  Press button again.  New interval is displayed.  Press button a final time.  “”END SIA”” is  displayed.  Turn ignition off.”

Bmw 5 Series (E60) 2004-2006 Can only be reset if oil life is below 80% and “!” is present next to indicator lamp.  Turn ignition to the “ON” position.  Press and hold button to the left of the speedometer until first item is displayed (approx. 10 seconds).  Press button until desired indicator is displayed.  Press and hold button until RESET? is displayed.  Press and hold button again for at least 3 seconds.  Turn ignition off.

Bmw 6 Series 2004-2006 Can only be reset if oil life is below 80% and “!” is present next to indicator lamp.  Turn ignition to the “ON” position.  Press and hold button to the left of  the speedometer until first item is displayed (approx. 10 seconds).  Press button until desired indicator is displayed.  Press and hold button until RESET? is displayed.  Press and hold button again for at least 3 seconds.  Turn ignition off.

Bmw 7 Series (E38) 1994-2002 Requires LED test light.  Turn ignition to the “ON” position.  Connect test light between terminal 7 of the diagnostic connector and ground.  After being connected for three seconds, five green LEDs will light up.  Turn ignition off.

Bmw 7 Series (E65/E66) 2002-2006 Can only be reset if oil life is below 80% and “!” is present next to indicator lamp.  Turn ignition to the “ON” position.  Press and hold button to the left of the speedometer until first item is displayed (approx. 10 seconds).  Press button until desired indicator is displayed.  Press and hold button until  RESET? is displayed.  Press and hold button again for at least 3 seconds.  Turn ignition off.

Bmw X3 2004-2006 Turn ignition off.  Press and hold left hand button to the right of the speedometer.  Turn ignition to the “I” position.  Continue to hold button until OIL SERVICE or “INSPECTION” is displayed.  Release button.  Press and hold button again until “RESET” or “RE” flashes.  Release button.  Press button again.  New interval is displayed.  Press button once more.  “END SIA” is displayed.

Bmw X5 1999-2000 Requires LED test light.  Turn ignition to the “ON” position.  Connect test light between terminal 7 of the diagnostic connector and ground.  After being connected for three seconds, five green LEDs will light up.  Turn ignition off.

Bmw X5 2000-2006 Turn ignition off.  Press and hold button to left of speedometer.  Turn ignition to the “I” position.  After 5 seconds, “OIL SERVICE” or “INSPECTION” will display.  Release button.  Press and hold button again.  After 5 seconds, “RESET” will flash.  Release button.  Press button once more.  New interval is displayed.  Press and hold button again.  After 5 seconds, the time-based interval is displayed.  Release button.  Press and hold button again.  After 5 seconds, “RESET” will flash.  Release button.  Press button again.  New interval is displayed.  Press button a final time.  “END SIA” is displayed.  Turn ignition off.

Bmw Z3 1996-2002 Requires LED test light.  Turn ignition to the “ON” position.  Connect test light between terminal 7 of the diagnostic connector and ground.  After being connected for three seconds, five green LEDs will light up.  Turn ignition off.

Bmw Z4 2003-2006 Press and hold left hand button between gauges.  Turn ignition switch to the “ON” position.  Keep holding button until “OIL SERVICE” or “INSPECTION” is displayed.  Release button.  Press and hold button again until “RESET?” is displayed.  Press and hold button again for at least 3 seconds.  Turn ignition off.

Bmw Z8 2000-2003 Requires LED test light.  Turn ignition to the “ON” position.  Connect test light between terminal 7 of the diagnostic connector and ground.  After being connected for three seconds, five green LEDs will light up.  Turn ignition off.

 

How to reset bmw 3 Series (E36) 1994-2001 Oil Service warning light
How to reset bmw 3 Series (E46) 1998-2000 Oil Service warning light
How to reset bmw 3 Series (E46) 2000-2006 Oil Service warning light
How to reset bmw 3 Series Hatchback 1994-2001 Oil Service warning light
How to reset bmw 5 Series (E34) 1994-1996 Oil Service warning light
How to reset bmw 5 Series (E39) 1996-2000 Oil Service warning light
How to reset bmw 5 Series (E39) 2000-2003 Oil Service warning light
How to reset bmw 5 Series (E60) 2004-2006 Oil Service warning light
How to reset bmw 6 Series 2004-2006 Oil Service warning light
How to reset bmw 7 Series (E38) 1994-2002 Oil Service warning light
How to reset bmw 7 Series (E65/E66) 2002-2006 Oil Service warning light
How to reset bmw X3 2004-2006 Oil Service warning light
How to reset bmw X5 1999-2000 Oil Service warning light
How to reset bmw X5 2000-2006 Oil Service warning light
How to reset bmw Z3 1996-2002 Oil Service warning light
How to reset bmw Z4 2003-2006 Oil Service warning light
How to reset bmw Z8 2000-2003 Oil Service warning light