Category Chevrolet Oil Reset

Chevrolet Spark m300 2009–2015 Oil Reset

Post Content

Chevrolet Spark m300  2009–2015 Oil Reset 


 The Chevrolet Spark is a city car produced by GM Korea, originally marketed prominently as the Daewoo Matiz. It has been available solely as a five-door hatchback. 
The redesigned Matiz (codenamed M300) was launched in 2009 and is based on the 2007 Chevrolet Beat concept car. Although sold globally as the Chevrolet Spark, in India this model retains the Beat name from the concept car, as the second generation Spark continues to be sold in this market. Prior to the 2011 elimination of the Daewoo marque in South Korea, the third generation Spark was marketed as the

Engine Oil Life System

The engine oil life system calculates
engine oil life based on vehicle use
and displays a DIC message when
it is necessary to change the engine
oil and filter. The oil life system
should be reset to 100% only
following an oil change.
Resetting the Oil Life System
1. Display Remaining Oil Life on
the DIC.
2. Press and hold the SET/CLR
button on the DIC for more than
five seconds. The oil life will
change to 100%
3. Done

Chevrolet Monte Carlo Oil Reset Instruction

Post Content

Chevrolet Monte Carlo Oil Reset Instruction

The Chevrolet Monte Carlo is a two-door coupe manufactured and marketed by Chevrolet from 1970 to 2007 model years (non-continuously), encompassing six generations. Chevrolet marketed the Monte Carlo as a personal luxury car, with the last generation classified as a full-sized coupé.

The car was named for the city Monte Carlo in the Principality of Monaco, specifically the ward of Monte Carlo/Spélugues.

How to Reset the Engine Oil Life

The Engine Oil Life System calculates when to change
your engine oil and filter based on vehicle use.
Anytime your oil is changed, reset the system so it can
calculate when the next oil change is required. If a
situation occurs where you change your oil prior to a
turned on, reset the system.
After changing the engine oil, the system must be reset.
To reset the CHANGE ENGINE OIL SOON message,
do the following procedures:

1. Turn the ignition to RUN, with the engine off.

2. Fully press and release the accelerator pedal slowly
three times within five seconds. If the CHANGE
ENGINE OIL SOON message flashes, the system
is reset. However, if it stays on, it did not reset.
Repeat the procedure.

3. Turn the key to OFF.

If the CHANGE ENGINE OIL SOON message comes
back on when you start your vehicle, the engine oil
life system has not reset. Repeat the procedure.