9 Steps BMW 7 Series TPMS Reset

9 Steps BMW 1 Series TPMS Reset 9 Steps BMW 1 Series TPMS Reset 1. Inflate all tires to pressure listed on tire placard. 2. Turn ignition to ON position (engine off). 3. Press and release the MENU button on the EVIC until the message RETRAIN TIRE SENSOR-NO is displayed. 4. Press the STEP button to select YES. 5. Press the MENU button to start the relearn process. The EVIC will display the message,TRAIN LEFT FRONT TIRE. 6. Starting at LF tire, place relearn magnet over valve stem until horn sounds. 7. After horn sounds, proceed as in step 5 for the next 3 sensors in this order: RF, RR, LR, SP (ifequipped). 8. Once the EVIC displays the message TRAINING COMPLETE, depress the STEP, C/T, RESET,or MENU buttons to exit the relearn procedure.

9 Steps BMW 7 Series TPMS Reset

The BMW 7 Series is a full-size luxury sedan produced by the German automaker BMW since 1977. It is the successor to the BMW E3 “New Six” sedan and is currently in its sixth generation.

The 7 Series is BMW’s flagship car and is only available as a sedan (including long wheelbase and limousine models). It traditionally introduces technologies and exterior design themes before they trickle down to other models in BMW’s lineup.

The first generation 7 Series was powered by straight-6 petrol engines, and following generations have been powered by inline-4, straight-6, V8 and V12 engines with both natural aspiration and turbocharging. Since 1995, diesel engines have been included in the 7 Series range.

Unlike the 3 Series and 5 Series sedans, BMW has not produced an M model for the 7 Series (ie an “M7”). However, in 2014 an “M Performance” option became available for the 7 Series.

9 Steps BMW 7 Series TPMS Reset

1. Inflate all tires to pressure listed on tire placard.
2. Turn ignition to ON position (engine off).
3. Press and release the MENU button on the EVIC until the message RETRAIN TIRE SENSOR-NO is displayed.
4. Press the STEP button to select YES.
5. Press the MENU button to start the relearn process. The EVIC will display the message,TRAIN LEFT FRONT TIRE.
6. Starting at LF tire, place relearn magnet over valve stem until horn sounds.
7. After horn sounds, proceed as in step 5 for the next 3 sensors in this order: RF, RR, LR, SP (ifequipped).
8. Once the EVIC displays the message TRAINING COMPLETE, depress the STEP, C/T, RESET,or MENU buttons to exit the relearn procedure.

Leave a Reply

Your email address will not be published. Required fields are marked *