9 Steps BMW 5 Series TPMS Reset

9 Steps BMW 1 Series TPMS Reset 9 Steps BMW 1 Series TPMS Reset 1. Inflate all tires to pressure listed on tire placard. 2. Turn ignition to ON position (engine off). 3. Press and release the MENU button on the EVIC until the message RETRAIN TIRE SENSOR-NO is displayed. 4. Press the STEP button to select YES. 5. Press the MENU button to start the relearn process. The EVIC will display the message,TRAIN LEFT FRONT TIRE. 6. Starting at LF tire, place relearn magnet over valve stem until horn sounds. 7. After horn sounds, proceed as in step 5 for the next 3 sensors in this order: RF, RR, LR, SP (ifequipped). 8. Once the EVIC displays the message TRAINING COMPLETE, depress the STEP, C/T, RESET,or MENU buttons to exit the relearn procedure.

9 Steps BMW 5 Series TPMS Reset

The BMW 5 Series is an executive car manufactured by German automaker BMW since 1972. It is the successor to the 4-door sedan models of the BMW New Class and is currently in its seventh generation.

Initially, the 5 Series was only available in a sedan body style. The touring body style was added in 1991 and the 5-door hatchback (“Gran Touring”) was added in 2009.

It is BMW’s second best-selling model after the 3-Series and in 2010 produced about 50% of the BMW’s profits.

On January 29, 2008, the 5 millionth 5 Series was manufactured, a 530d Saloon in Carbon Black Metallic.

The 5 Series got its name by being the fifth of the “new series” cars after the V-8 and Isetta era and was the replacement for the older four-door New Class sedans. The current BMW naming convention began with the first 5 Series.

9 Steps BMW 5 Series TPMS Reset

1. Inflate all tires to pressure listed on tire placard.
2. Turn ignition to ON position (engine off).
3. Press and release the MENU button on the EVIC until the message RETRAIN TIRE SENSOR-NO is displayed.
4. Press the STEP button to select YES.
5. Press the MENU button to start the relearn process. The EVIC will display the message,TRAIN LEFT FRONT TIRE.
6. Starting at LF tire, place relearn magnet over valve stem until horn sounds.
7. After horn sounds, proceed as in step 5 for the next 3 sensors in this order: RF, RR, LR, SP (ifequipped).
8. Once the EVIC displays the message TRAINING COMPLETE, depress the STEP, C/T, RESET,or MENU buttons to exit the relearn procedure.

Leave a Reply

Your email address will not be published. Required fields are marked *